Christie Mirage WU12K-M

1920 x 1200 resolution - 10,500 ANSI lumens

Overview

The Christie Mirage WU12K-M delivers more pixels, and more performance for visually stunning 3D for home theatre and entertainment, museums and education, scientific research, manufacturing, oil and gas exploration and anything in between. Offering complete compatibility with today’s 3D home entertainment requirements, the Christie Mirage WU12K-M is ready for Blu-ray 3D video, PS3 and other gaming consoles and meets the mandatory 3D spec for HDMI v1.4a.

With dual image processing capabilities, there are three modes of 3D input - native 3D input, frame doubled 3D and Dual Input 3D for maximum source compatibility and high-performance flicker-free operation without the need of a passive to active converter.

The Christie Mirage WU12K-M features 10,500 ANSI lumens, WUXGA resolution and up to 10,000:1 contrast.

Features

10,500 ANSI lumens
WUXGA resolution (1920 x 1200)
Up to a full 120Hz native frame rate
Standard full 330MHz Dual Link DVI-D
Variable contrast ratio using electronically adjustable iris for crisp, detailed images - 2500-10,000:1 (full on, full off) / 650:1 ANSI
At maximum brightness the projector draws a maximum power of 1320W
Smallest chasis in its class
Motorised yellow notch filter
Dual Osram® PviP® lamps (350W)
Embedded Christie Twist™ image warping and edge-blending
Dust-sealed engine, filter-free design
Intelligent Lens System (ILS™) for zoom, focus, horizontal and vertical offset

Technical Specification

Image 10,500 ANSI Lumens
2,500-10,000:1 FOFO
650:1 ANSI
Electronically adjustable iris (manual or dynamic)
80% brightness uniformity
Display Technology and Resolution 3-chip 0.96" DMD
Native WUXGA 1920 x 1200
Frame delay: As little as one frame
Input Signal Compatibility Native Dual Link DVI-D
Analog BNC (Optional)
Frame-doubled 3D - Dual Link DVI, VGA (HDMI, Analog BNC & SDI optional)
Pixel Clock: 330 Mhz
Scan Rates: H - 15kHz to 120kHz
V – 23.97Hz to 150Hz (up to 120Hz maximum output)
Inputs, Control & Networking RS232 in/out
RS422 in
Ethernet (10/100)
USB device
GPIO (RS232 9-pin male connector)
Built-in backlit LCD keypad
Remote control (with optional wired XLR connection)
Slot 1 standard (populated): Dual link DVI-D (330MHz) and VGA (165MHz)
Slots 2-4 unpopulated
Full bandwidth Analog BNC
Dual Link DVI input card (330MHz), \- VGA (165MHz)
Dual SD/HD-SDI
Video Decoder
Twin HDMI
Two standard Dual Link DVI input cards (330MHz)
Optional Input Modules Slots 3-4 unpopulated
Full bandwidth Analog BNC
Dual Link DVI input card (330MHz), \- VGA (165MHz)
Dual SD/HD-SDI
Video Decoder
Twin HDMI
Two standard Dual Link DVI input cards (330MHz)
Inputs, Control and Networking RGBHV/YPbPr via 5 BNC
DVI-I - digital/analog RGB/YPbPr (HDCP)
One composite video, one S-Video
Two option slots for analog/digital modules
3 RS-232 ports and 1 RS-422 port
On-board ChristieNET™ connectivity (RJ45)
Built-in backlit keypad and IR remote control
Optical System Lens mount:
Motorized horizontal and vertical lens offset
Scheimpflug (tilt) adjustment
Built-in light shutter
Tool-free lens insertion system

Illumination:
Dual Osram® PviP® 350W lamps
Lamp Life (Typical): 1500hrs @ 350W, 2000hrs @ 300W
Advanced Feature Set Embedded Christie Twist™ - internal advanced warping and edge-blending
LiteLOC™
Electronically adjusted iris (manual or dynamic)
Dust-sealed, filter-free design
Reduced power requirements (as compared to competitive products on the market today) – at maximum brightness the unit only draws 1320W; standby power consumption (Phantom power draw) is less than 20W
Reduced noise levels
LCD keypad – active keys are amber to indicate whether function selected will be seen by the audience
Motorised yellow notch filter
Power Requirements 100V AC to 240V AC @ 50/60Hz
Power consumption: 1320W maximum
Thermal dissipation: 4,508 BTU/hr
Operating current: 12A @ 100V
Dimensions (excluding lens) Weight: 25kg (55 lb) (without lens)
Shipping weight: 38kg (87 lb) (without lens)
Size: (W x L x H): 55 x 561 x 259mm (19.7" x 22.1" x 10.2")
Operating Environment Operating temperature: 40-104°F (5-40°C)
Humidity (non-condensing): 20-80% non-condensing

Related Equipment

Back to equipment list
Registered in England: 1983765 | VAT Registration: GB 421 628 766
Copyright © QED Productions 2017